Stationary washing area

The legislator prescribes that numerous applications, e.g. the cleaning of paint stripping after chemical stripping may only be steam-blasted in a closed system. It is illegal, e.g. to discharge lye-containing paint to the wastewater. We developed this system for this application.
The system includes a neutralizing agent and a pH value tester so that you can keep the process water pH neutral again and again after a certain alkali saturation. Inexpensive and simple and in compliance with the law.

Closed, circulating cleaning system for e.g. after chemical stripping for final cleaning before further treatment in 100% Made in Germany high end quality.

Stationary washing station with high-pressure cleaner with wall gyroscope for cleaning paint stripping parts or e.g. Engine parts with highly tempered V4 stainless steel substructure.

V4 substructure, consisting of a tub with V4 stainless steel gratings and V2 stainless steel side walls in the dimensions 3000 x 1500 x 300 x 2 mm

• Mobile (hot water also possible) high pressure cleaner for professional users
• Sturdy metal frame for long life
• All-round device protection with tubular frames
• Hot water resistant triplex piston pump with brass pump head, ceramic plunger
and stainless steel valves
• Air-cooled drive motor with 1400 rpm
• Option stainless steel boiler with 12kW heating capacity
• Option stand-by system for hot water - hot water immediately available
• Stepless pressure regulation through brand new unloader valve technology
• TSS system with switch-off delay
• 2-step main switch for device and heating ON / OFF
• Steel mesh high pressure hose
• Switch gun with insulation, spray lance (stainless steel), HP nozzle and nozzle protection
• Storage facility for control pistol and spray lance integrated in the device
• Option STR version: professional hose reel with stainless steel shaft

Technical specifications:

Current type ~ / V / Hz 3/400/50
Flow rate l / h 1800
Pressure bar 30-130
Max. Temperature ° C 80
Connected load 380 kW 16 Amp

• Environmental friendliness

No exhaust gases, so operation in closed rooms is possible.

• Ease of use

Central on / off switch for the entire high-pressure cleaner.
Stand-by programming for immediate use.
TSS system with lag delay.

• heating technology

Thanks to the tried and tested boiler system, the water is also during
closed trigger gun warmed, kept at temperature and
temporarily stored in the hot water tank. This means that low heating outputs are sufficient

2 UNISTAR 2000-A, 2800 min
V impeller pump with motor
Impeller pump with motor / max. Flow rate (l) 30 l / min
Max. Flow rate (m³) 1.8 m³ / h / max. Delivery pressure 5 bar / inlet / outlet ¾ "aG
Impeller Perbunan® (NBR), material bushing polyamide
Shaft seal Perbunan® (NBR)
Material pump housing aluminum EN AW-6082 / AC-43400
Electric motor / nominal voltage (AC) 230 V, nominal frequency 50 Hz
Nominal power 0.37 kW, nominal current (AC) 3.2 A.
Starting capacitor 40 µF, operating capacitor 20 µF, max. Speed ​​2800 min-1
3 ECO system bag filter housing
Gr. XO filter area 0.16 m², throughput approx. 12 m³ / h pressure 10 bar, temperature 110 ° C
Ceiling gyroscope and wall swivel arm made of stainless steel, type KR 360 °, length: 1620 mm
Gun ST-2600 Swivel 3/8 "IT / lance made of 800 stainless steel
Nozzle holder hex 1/4 "/ HD nozzle 2505 1/8 NPT / nozzle protection cap PA
Special part remote control and signal lamp if filter is closed.

All further information via the contact form. The contact person is our Mr. Hans-Jürgen Neujahr

Tel .: 15112023588
Email: H.Neujahr@Starpaint.eu